|
|
|
National Stock Number:
4720-01-507-5843
Federal Supply Class:
4720
National Item Identification Number:
015075843
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| 6395308 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6395308-4 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 7326278 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7326278 FIND 6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END CONNECTION DESIGN | ELBOW 2ND END | | END CONNECTION DESIGN | STRAIGHT 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END | | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | FLOW ANGLE | 90.0 DEGREES 2ND END | | INSIDE SURFACE CONDITION | CONVOLUTED | | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEX HOSE,BATTERY PURGE | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 59.000 INCHES MINIMUM WORKING AND 61.000 INCHES MAXIMUM WORKING | | MEDIA FOR WHICH DESIGNED | NITROGEN, GASEOUS AND AIR SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.8125 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.8125 INCHES 2ND END | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | INCLUDES TWO 13/16-16 300 SERIES STAINLESS STEEL PLUGS ATTACHED WITH TWO 300 SERIES STAINLESS STEEL LANYARDS; TWO LOCKWIRE HOLES ON EACH NUT 180 DEG APART; NUTS ARE NICKEL-ALUMINUM-BRONZE ALLOY | | SPECIAL MARKINGS | MARK USING LABEL TAG SIMILAR TO THAT DESCRIBED IN NAVSEA S6430-AE-TED-010 WITH THE FOLLOWING INFO; P/N, VENDOR/CAGE CODE, SER NO, SERVICE, SHIP ID, SYSTEM PRESSURE, HOSE SIZE, PRESS TEST DATE | | TEMP RATING | 50.0 DEG FAHRENHEIT AND 95.0 DEG FAHRENHEIT SINGLE RESPONSE | | TEST DATA DOCUMENT | 53711-NAVSEA S6430-AE-TED-010 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B 1ST END | | THREAD CLASS | 2B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD QUANTITY PER INCH | 16 1ST END | | THREAD QUANTITY PER INCH | 16 2ND END | | THREAD SERIES DESIGNATOR | UN 1ST END | | THREAD SERIES DESIGNATOR | UN 2ND END |
|
|