|
|
|
National Stock Number:
4720-01-507-5725
Federal Supply Class:
4720
National Item Identification Number:
015075725
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| 6395229 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6395229-1 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 7326278 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7326278 FIND 2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END CONNECTION DESIGN | STRAIGHT 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | INSIDE SURFACE CONDITION | CONVOLUTED | | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEX HOSE,BATTERY PURGE | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 7.000 INCHES MINIMUM WORKING AND 9.000 INCHES MAXIMUM WORKING | | MEDIA FOR WHICH DESIGNED | NITROGEN, GASEOUS AND AIR SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.8125 INCHES 1ST END | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | INCLUDES TWO 13/16-16 300 SERIES STAINLESS STEEL PLUGS ATTACHED WITH TWO 300 SERIES STAINLESS STEEL LANYARDS; TWO LOKWIRE HOLES ON EACH NUT 180 DEG APART, NUTS ARE NICKEL-ALUMINUM-BRONZE ALLOY | | SPECIAL MARKINGS | SHALL BE MARKED USING A LABEL TAG SIMILAR TO THAT DESCRIBED IN NAVSEA S6430-AE-TED-D10, WITH P/N, VENDOR/CAGE CODE, SER NO, SERVICE, SHIP I.D., SYSTEM PRESSURE, HOSE SIZE, AND PRESS. TEST DATE | | TEMP RATING | 50.0 DEG FAHRENHEIT AND 95.0 DEG FAHRENHEIT SINGLE RESPONSE | | TEST DATA DOCUMENT | 53711-7326278 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 2B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 16 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END |
|
|