| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 752.0 MILLIMETERS NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT AND |
| MILDEW RESISTANT AND |
| VIBRATION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD OR |
| 1ST LAYER BRAIDED FIBER OR |
| 1ST LAYER WOVEN FABRIC AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND |
| 0.656 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | MIL-H-13444, TYPE 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; FITTINGS SHALL BE IAW SAE J516; BAND MARKER SHALL BE IAW MIL-E-43436; CLEAN BY BLOWING CLEAN DRY AIR THROUGH HOSE ASSEMBLY, THEN PLUG/CAP ALL ENDS PRIOR TO SHIPMENT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |