| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 106.7638 INCHES MINIMUM OVERALL AND |
| 107.4724 INCHES MAXIMUM OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT AND |
| MILDEW RESISTANT AND |
| VIBRATION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD OR |
| 1ST LAYER BRAIDED FIBER OR |
| 1ST LAYER WOVEN FABRIC AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND |
| 0.656 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.625 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIAL MARKINGS | BAND MARKER IAW MIL-B-43436; HOSE WILL HAVE A CONTINUOUS YELLOW STRIPE AND BE MARKED IAW MIL-H-13444 |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MTV INTERMEDIATE AXLE VENT |