| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 39.500 INCHES MINIMUM OVERALL AND |
| 40.500 INCHES MAXIMUM OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -55.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 875.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1750.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND |
| OIL RESISTANT AND |
| FUEL RESISTANT AND |
| MILDEW RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND |
| 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND |
| 3RD LAYER BRAIDED STEEL WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| INSIDE DIAMETER | 0.500 INCHES MINIMUM AND |
| 0.539 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.808 INCHES MINIMUM AND |
| 0.854 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| 0.750 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| 16 2ND END |
| THREAD CLASS | 2B 1ST END |
| 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444E GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND |
| 4 TABLE |