| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | NITROGEN, GASEOUS AND |
| AIR SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | 50.0 DEG FAHRENHEIT AND |
| 95.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| SWIVEL NUT, GASKET SEAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| 0.750 INCHES 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| TEST DATA DOCUMENT | 53711-NAVSEA S6430-AE-TED-010 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND |
| 96906-MIL-D-1622 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRITICALITY CODE JUSTIFICATION | TEST |
| SPECIFICATION/STANDARD DATA | 31442-6395308 MANUFACTURERS SPECIFICATION |
| SPECIAL FEATURES | ASSEMBLY INCLUDES TWO 3/4-16 INCH PLUGS ATTACHED WITH STAINLESS STEEL LANYARDS; TWO LOCKWIRE HOLES ON EACH END NUT; NUTS ARE NICHOL-ALUMINUM-BRONZE ALLOY |
| NONDEFINITIVE SPEC/STD DATA | 2 ITEM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEX HOSE, AIR VENT |