| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED FABRIC |
| OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, PUMP DISCHARGE |
| MEASURING METHOD AND LENGTH | 108.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.250 INCHES SECOND END |
| NOMINAL THREAD SIZE | 0.313 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; INCLUDES 2EA P/N 30682-5-4 OR EQUAL; 2EA CLAMPS P/N HC9-8 OR EQUAL; 1EA HOSE P/N 293-5 OR EQUAL (SAE J30R7); 1EA ELBOW P/N SAE 514 5-4-070202 |
| SPECIFICATION/STANDARD DATA | SAE J30R7-81343 NATIONAL STD/SPEC |
| TEMP RATING | -29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | NPT SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |