| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 2832.3 MILLIMETERS MINIMUM OVERALL AND |
| 2857.7 MILLIMETERS MAXIMUM OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -55.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND |
| 2ND LAYER RUBBER IMPREGNATED FABRIC AND |
| 3RD LAYER BRAIDED WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| INSIDE DIAMETER | 1.125 INCHES MINIMUM AND |
| 1.172 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 1.456 INCHES MINIMUM AND |
| 1.518 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY,TRANSMISSION COLLER INLET |