| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC FIRST END |
| INSIDE DIAMETER | 1.125 INCHES MINIMUM AND 1.172 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER RUBBER IMPREGNATED FABRIC AND 3RD LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.456 INCHES MINIMUM AND 1.518 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, TRANSMISSION COOLER INLET |
| MEASURING METHOD AND LENGTH | 3848.1 MILLIMETERS MINIMUM OVERALL AND 3873.5 MILLIMETERS MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; 152 HOSE ASSEMBLY WITH TWO STRAIGHT 1 FEMALE CONNECTIONS |
| TEMP RATING | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |