| END CONNECTION DESIGN | STRAIGHT FIRST END |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 2.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED COTTON FABRIC |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 2.875 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 594.000 INCHES MINIMUM WORKING AND 606.000 INCHES MAXIMUM WORKING |
| MINIMUM INSIDE BENDING RADIUS | 24.000 INCHES |
| NOMINAL THREAD SIZE | 3.000 INCHES FIRST END |
| NONDEFINITIVE SPEC/STD DATA | 48 LENGTH AND 40 SIZE |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | NORMAL OPERATING PRESSURE IS 75 PSIG |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-8795 GOVERNMENT SPECIFICATION |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |