| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND |
| HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 1200.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| HEAT RESISTANT AND |
| HYDRAULIC SOLUTION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND |
| 2ND LAYER BRAIDED TEXTILE YARN AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| INSIDE DIAMETER | 0.188 INCHES MINIMUM AND |
| 0.214 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.500 INCHES MINIMUM AND |
| 0.539 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| 45.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| 0.438 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| 20 2ND END |
| THREAD CLASS | 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | 81343-SAE J517 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |