| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 16.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3600.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| INSIDE DIAMETER | 0.641 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.438 INCHES NOMINAL |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| UNJF 2ND END |
| NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| 0.500 INCHES 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIAL FEATURES | SHALL BE FAA-TSO-C53A TYPE A CERTIFIED WITH TSO TAG ATTACHED; WHEN ORDERING IDENTIFY WITH BELL STANDARD PART NUMBER FROM THE SOURCES LISTED ON QPL OF BHTI PROCUREMENT SPECIFICATION 299-947-045 ONLY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY - NON FIRE RESISTANT, FLARED, RUBBER |