| MATERIAL | RUBBER 1ST PLY |
| STEEL CORROSION RESISTING 3RD PLY |
| PLASTIC POLYAMIDE 4TH PLY |
| PLASTIC POLYAMIDE 5TH PLY |
| STEEL CORROSION RESISTING REINFORCING WIRE |
| PLASTIC POLYESTER COVER |
| MATERIAL DOCUMENT AND CLASSIFICATION | ZZ-R-765,CLASS 2A,GRADE 70 FED SPEC SINGLE MATERIAL RESPONSE 1ST PLY |
| ASTM-A-313 ASSN STD SINGLE MATERIAL RESPONSE 3RD PLY |
| QQ-A-367,T6 FED SPEC 2ND MATERIAL RESPONSE AND |
| QQ-A-225/8,T6 FED SPEC 3RD MATERIAL RESPONSE 1ST END COUPLING |
| QQ-A-225/6,T6 FED SPEC 1ST MATERIAL RESPONSE AND |
| QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE AND |
| QQ-A-225/8,T6 FED SPEC 3RD MATERIAL RESPONSE 2ND END COUPLING |
| ASTM-A-313 ASSN STD SINGLE MATERIAL RESPONSE REINFORCING WIRE |
| AIR1785 MIL SPEC SINGLE MATERIAL RESPONSE COVER |
| SURFACE TREATMENT | PASSIVATE 3RD PLY |
| ANODIZE 1ST END COUPLING |
| ANODIZE 2ND END COUPLING |
| PASSIVATE REINFORCING WIRE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR |
| ASTM-A-380 NATIONAL SPEC SINGLE TREATMENT RESPONSE 3RD PLY |
| MIL-A-8625 MIL SPEC ALL TREATMENT RESPONSES 1ST END COUPLING |
| MIL-A-8625 MIL SPEC ALL TREATMENT RESPONSES 2ND END COUPLING |
| QQ-P-353JGAASTM-A-380 FED SPEC SINGLE TREATMENT RESPONSE REINFORCING WIRE |
| STYLE DESIGNATOR | HELICALLY WOUND CONTINOUS WIRE SUPPORTED |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| MEASURING METHOD AND LENGTH | 16.500 INCHES NOMINAL OVERALL |
| CONNECTION TYPE | GROUND JOINT EXTERNALLY THREADED TAILPIECE W/ UNION NUT BOTH ENDS |
| COUPLING STYLE | THREADED INTERNAL BOTH ENDS |
| THREAD SERIES DESIGNATOR | UNJF BOTH ENDS |
| NOMINAL THREAD SIZE | 0.563 INCHES BOTH ENDS |
| THREAD QUANTITY PER INCH | 18 BOTH ENDS |
| THREAD TOLERANCE CLASS | 3B INTERNAL BOTH ENDS |
| MINIMUM INSIDE BENDING RADIUS | 1.250 INCHES |
| MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| FEATURES PROVIDED | FLAME RESISTANT |
| SPECIAL FEATURES | MATTERIAL FOR INNER AND OUTER BRAID IS NOMEX ARAMID YARN, HOSE ASSEMBLY CONNECTORS ARE 37 DEGREE FLARE NUT TYPE; 1ST END AT 90 DEGREE BEND; 2ND END STRAIGHT; BOTH FEMALE FLARE; HOSE OUTER CHAFE SLEEVE IS MONOFILAMENT FIRE RETARDANT; ITEM MEETS REQUIREMENTS FOR USE WITH OXYGEN BREATHING SYSTEMS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, SILICONE RUBBER, 500PSI, 37 DEGREE FLARE |