| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| MEASURING METHOD AND LENGTH | 11.250 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 500.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| HYDRAULIC SOLUTION RESISTANT AND |
| CORROSION RESISTANT AND |
| FIRE RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND |
| 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 3RD LAYER MOLDED POLYTETRAFLUOROETHYLENE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| CONNECTION STYLE | NUT ASSEMBLY WITH GASKET 1ST END |
| NUT ASSEMBLY WITH GASKET 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| UNJF 2ND END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| 0.437 INCHES 2ND END |
| THREAD CLASS | 3A 1ST END |
| 3A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE; AS1072 SLEEVE SILICONE COVERED WITH CRES.BANDS |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-25579 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS8006E112AA |