| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 37.750 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.542 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| END FLANGE CONSTRUCTION | SPLIT 1ST END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END |
| FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |