| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BOLT CIRCLE DIAMETER | 6.562 INCHES NOMINAL 1ST END |
| BOLT CIRCLE DIAMETER | 6.562 INCHES NOMINAL 2ND END |
| BOLT HOLE DIAMETER | 0.688 INCHES NOMINAL 1ST END |
| BOLT HOLE DIAMETER | 0.688 INCHES NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 8 1ST END |
| BOLT HOLE QUANTITY | 8 2ND END |
| BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CONNECTION STYLE | RAISED 1ST END |
| CONNECTION STYLE | RAISED 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE THICKNESS | 0.250 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ BOLT HOLES 2ND END |
| FLANGE THICKNESS | 0.080 INCHES NOMINAL 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 4.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 95.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 24.000 INCHES |
| OUTSIDE DIAMETER | 4.500 INCHES NOMINAL |
| RAISED FACE DIAMETER | 4.500 INCHES NOMINAL 1ST END |
| RAISED FACE DIAMETER | 4.500 INCHES NOMINAL 2ND END |
| RAISED FACE HEIGHT | 0.080 INCHES NOMINAL 2ND END |
| RAISED FACE HEIGHT | 0.250 INCHES NOMINAL 1ST END |
| TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 410.0 DEG FAHRENHEIT SINGLE RESPONSE |