| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 44.5 MILLIMETERS NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 66.7 MILLIMETERS NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 96.8 MILLIMETERS NOMINAL 2ND END |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 11.500 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| HYDROSTATIC TEST PRESSURE | 45.0 KILOPASCALS |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 3150.0 MILLIMETERS NOMINAL OVERALL |
| SPECIAL FEATURES | ADAPTER ATTACHED TO SECOND END FITTING ELBOW |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BOLT HOLE DIAMETER | 16.6 MILLIMETERS NOMINAL 1ST END |
| BOLT HOLE DIAMETER | 20.0 MILLIMETERS NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BURST TEST PRESSURE | 116.0 KILOPASCALS |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 31.8 MILLIMETERS NOMINAL 1ST END |