| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND |
| HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 24.500 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND |
| 2ND LAYER BRAIDED WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.600 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| UNJF 2ND END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| 0.438 INCHES 2ND END |
| THREAD CLASS | 2B 1ST END |
| 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 19207 |
| MFR SOURCE CONTROLLING REFERENCE | 12365278-80 |