| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BOLT CIRCLE DIAMETER | 1.635 INCHES NOMINAL SECOND END |
| BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 4 SECOND END |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 2.094 INCHES NOMINAL SECOND END |
| FLANGE THICKNESS | 0.234 INCHES NOMINAL SECOND END |
| FLANGE STYLE | ROUND W / BOLT HOLES SECOND END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.391 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.102 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 22.250 INCHES MINIMUM WORKING AND 22.750 INCHES MAXIMUM WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.600 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | OIL COOLER TO FUEL FLOW DIVIDER HOSE ASSEMBLY |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |