| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND |
| HYDRAULIC FLUID, WATER BASE AND |
| WATER AND |
| AIR SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 8.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND |
| WEATHERPROOF |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER MOLDED RUBBER, SYNTHETIC AND |
| 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| FEATURES PROVIDED | NONSKIVE |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |