| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| WEATHERPROOF |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID STEEL WIRE AND |
| 4TH LAYER SPIRALLY LAID STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| FLANGE THICKNESS | 0.620 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.100 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 3.660 INCHES MINIMUM AND |
| 3.720 INCHES MAXIMUM 2ND END |
| FLANGE WIDTH | 3.750 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND |
| HYDRAULIC FLUID, WATER BASE AND |
| WATER AND |
| AIR SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 160.000 INCHES NOMINAL WORKING |