| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| BURST TEST PRESSURE | 1540.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE FIRST END |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 770.0 POUNDS PER SQUARE INCH |
| INNER CONVEYING TUBE STYLE | ANNULAR OPEN-PITCH CORRUGATED |
| INSIDE DIAMETER | 0.313 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.510 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 9.750 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 1.560 INCHES |
| NOMINAL THREAD SIZE | 0.500 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.500 INCHES SECOND END |
| OPERATING PRESSURE | 385.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| TEMP RATING | -77.0 FAHRENHEIT AND 650.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |