| END CONNECTION DESIGN | ELBOW FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 305.0 |
| BURST TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND SELF-SEALING |
| FLOW ANGLE | 45.0 DEGREES FIRST END |
| HYDROSTATIC TEST PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER HELIX COPPER COIL AND 2ND LAYER BRAIDED FABRIC AND 3RD LAYER HELIX COPPER COIL AND 4TH LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT |
| OUTSIDE DIAMETER | 1.594 INCHES MINIMUM AND 1.719 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 21.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| NOMINAL THREAD SIZE | 1.188 INCHES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| THREAD QUANTITY PER INCH | 16 FIRST END |