| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND |
| 2ND LAYER BRAIDED STEEL WIRE AND |
| OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.590 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL, EXTERNAL SEAT FOR GASKET SEAL 1ST END |
| SWIVEL, PLAIN 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| STRAIGHT 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NPTF 2ND END |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| 0.500 INCHES 2ND END |
| THREAD CLASS | 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | NONSKIVE |
| SPECIFICATION/STANDARD DATA | SAE J517,100R2,TYPE AT-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |