| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 22.250 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| FLANGE THICKNESS | 0.495 INCHES NOMINAL 1ST END |
| 0.495 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.735 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED SWIVEL W/ GASKET GROOVE 1ST END |
| RAISED SWIVEL W/ GASKET GROOVE 2ND END |
| RAISED FACE DIAMETER | 1.250 INCHES NOMINAL 1ST END |
| 1.250 INCHES NOMINAL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.375 INCHES NOMINAL 1ST END |
| 2.375 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 355.0 |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| SPECIAL FEATURES | FLIGHT SAFETY CRITICAL ITEM |