| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 349.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID STEEL WIRE AND |
| 4TH LAYER SPIRALLY LAID STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| FLANGE THICKNESS | 0.265 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.230 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | PLAIN 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 1ST END |
| FLANGE LENGTH | 2.590 INCHES NOMINAL 1ST END |
| FLANGE WIDTH | 2.060 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.875 INCHES NOMINAL 1ST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.875 INCHES NOMINAL 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| SPECIAL FEATURES | BOTH ENDS HAVE CRIMPED FLANGES,WITH 0-RING,ONE IS WELD FITTING |