| END CONNECTION DESIGN | ELBOW FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 35.0 |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLUE |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | RUBBER COMPOSITION OUTER LAYER |
| OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| OUTSIDE DIAMETER | 0.690 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 19.625 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 0.688 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.688 INCHES SECOND END |
| SPECIAL FEATURES | ALL HYD. FLUID CONTACT SURFACES AND ASSOCIATED RESIDUAL HYD. FLUID SHALL BE IN ACCORDANCE WITH MIL-STD-1246,CLEANINESS LEVEL 200. |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD CLASS | 2B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 16 FIRST END |
| THREAD QUANTITY PER INCH | 16 SECOND END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| THREAD SERIES DESIGNATOR | UN SECOND END |