| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 29.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT AND |
| HYDRAULIC SOLUTION RESISTANT AND |
| FUEL RESISTANT AND |
| OIL RESISTANT AND |
| ETHYLENE GLYCOL RESISTANT AND |
| SOLVENT RESISTANT AND |
| OXIDATION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 7.380 INCHES |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.590 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 130.0 |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| UN 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| 1.312 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-25579 GOVERNMENT SPECIFICATION |
| NONDEFINITIVE SPEC/STD DATA | 16 SIZE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-25579 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS8005M290EA130 |