| END CONNECTION DESIGN | ELBOW FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING NICKEL ALLOY ALL ENDS |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| BURST TEST PRESSURE | 3600.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END |
| CONNECTION TYPE | THREADED EXTERNAL BOSS FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| INSIDE DIAMETER | 1.961 INCHES MINIMUM AND 2.039 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND 3RD LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OXIDATION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 2.702 INCHES MINIMUM AND 2.828 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 55.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | WATER, FRESH AND WATER, SALT AND AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 25.000 INCHES |
| NOMINAL THREAD SIZE | 3.750 INCHES FIRST END |
| OPERATING PRESSURE | 900.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; TWO HOSE ASSEMBLIES CONNECTED BY 3 90 DEGREE ELBOWS; FIRST AND SECOND LEG LENGTH 27.500 |
| SPECIFICATION/STANDARD DATA | MIL-H-24136/2-32 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2A FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |