| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 156.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| WEATHERPROOF AND |
| ABRASION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER MOLDED RUBBER, SYNTHETIC AND |
| 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.156 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | SAE 100R2,TYPE AT-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |