| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING SECOND END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL CORROSION RESISTING ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL CORROSION RESISTING FIRST END |
| BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN OPTIONAL END FIRST END |
| CONNECTION TYPE | THREADED INTERNAL PIPE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE FIRST END |
| HYDROSTATIC TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, ETHYLENE PROPYLENE AND 2ND LAYER BRAIDED RAYON CORD OR 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 33.750 INCHES MINIMUM WORKING AND 34.250 INCHES MAXIMUM WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.5625 INCHES FIRST END |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| TEMP RATING | 0.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |