| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL CORROSION RESISTING ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL CORROSION RESISTING 1ST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING 2ND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 1ST END |
| INSIDE DIAMETER | 0.855 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 5TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 7.500 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 1.250 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND ETHYLENE GLYCOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND HEAT RESISTANT AND VIBRATION RESISTANT |
| OUTSIDE DIAMETER | 1.266 INCHES NOMINAL |
| SEAT ANGLE | 8.5 DEGREES 1ST END |
| SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL FIRE SHIELD, SILICONE RUBBER , INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 14 1ST END |
| THREAD SERIES DESIGNATOR | UNJS 1ST END |