| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 22.250 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND |
| 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT AND |
| FUEL RESISTANT AND |
| OIL RESISTANT AND |
| SOLVENT RESISTANT AND |
| VIBRATION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.188 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 145.0 |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| UNJ 2ND END |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| 1.062 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND |
| REUSABLE END FITTINGS |