| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL BOSS 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 16.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| OZONE RESISTANT AND |
| MILDEW RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.781 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| 0.562 INCHES 2ND END |
| THREAD CLASS | 2B 1ST END |
| 1A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| NONDEFINITIVE SPEC/STD DATA | I TYPE |