| END CONNECTION DESIGN | ELBOW FIRST END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL FIRST END |
| BOLT HOLE QUANTITY | 4 FIRST END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL FIRST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL FIRST END |
| CONNECTION STYLE | PLAIN FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 2.375 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.250 INCHES NOMINAL FIRST END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) FIRST END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL FIRST END |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.704 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 86.500 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |