| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEASURING METHOD AND LENGTH | 17.970 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND |
| FUEL RESISTANT AND |
| HYDRAULIC SOLUTION RESISTANT AND |
| SOLVENT RESISTANT AND |
| WATERPROOF AND |
| ESTER RESISTANT AND |
| HEAT RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER BRAIDED ASBESTOS CORD AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| INSIDE DIAMETER | 0.615 INCHES MINIMUM |
| OUTSIDE DIAMETER | 0.812 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| NOMINAL THREAD SIZE | 1.063 INCHES 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIAL FEATURES | PERMANENT IDENTIFICATION TAG ATTACHED; PROTECTIVE CLOSURES SUPPLIED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 98441 |
| DESIGN CONTROL REFERENCE | A1259-1 |