| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| RAISED FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 16.440 INCHES NOMINAL EXCLUDING END FITTINGS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND |
| 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED WOVEN COTTON CORD |
| MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| FLANGE THICKNESS | 0.359 INCHES NOMINAL 1ST END |
| 0.359 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RAISED 1ST END |
| RAISED 2ND END |
| RAISED FACE HEIGHT | 2.135 INCHES NOMINAL 1ST END |
| 2.135 INCHES NOMINAL 2ND END |
| RAISED FACE DIAMETER | 0.062 INCHES NOMINAL 1ST END |
| 0.062 INCHES NOMINAL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| 0.266 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.375 INCHES NOMINAL 1ST END |
| 2.375 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL 1ST END |
| 2.375 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 1ST END |
| 1.812 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 1ST END |
| 1.812 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 13.0 DEGREES 1ST END |
| 113.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 193.0 |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |