| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 52.500 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| FLANGE THICKNESS | 0.310 INCHES MINIMUM AND |
| 0.320 INCHES MAXIMUM 1ST END |
| 0.310 INCHES MINIMUM AND |
| 0.320 INCHES MAXIMUM 2ND END |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.080 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.365 INCHES MINIMUM AND |
| 2.385 INCHES MAXIMUM 1ST END |
| 2.365 INCHES MINIMUM AND |
| 2.385 INCHES MAXIMUM 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 22.5 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |