| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEASURING METHOD AND LENGTH | 19.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE OR |
| 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.656 INCHES MINIMUM AND |
| 0.718 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | MIL-H-13531,TYPE 2 OR 3,CLASS A OR B PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION AND |
| 96906-MS500083 GOVERNMENT STANDARD |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-13531 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS500083Z040190 |