| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 50.750 INCHES MINIMUM OVERALL AND |
| 51.250 INCHES MAXIMUM OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -55.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND |
| MILDEW RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC AND |
| 2ND LAYER BRAIDED WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED FABRIC |
| MINIMUM INSIDE BENDING RADIUS | 1.250 INCHES |
| INSIDE DIAMETER | 0.313 INCHES MINIMUM AND |
| 0.344 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.597 INCHES MINIMUM AND |
| 0.635 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| PLAIN 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| NPTF 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| 0.375 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| TEST DATA DOCUMENT | 19207-12256272 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19207 |
| DESIGN CONTROL REFERENCE | 12256272 |