| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | SELF-SEALING |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| HYDROSTATIC TEST PRESSURE | 120.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.750 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FIRE RESISTANT AND MILDEW RESISTANT AND VIBRATION RESISTANT |
| OUTSIDE DIAMETER | 1.657 INCHES NOMINAL |
| SPECIAL FEATURES | CAPABLE OF WITHSTANDING 50 CALIBER ARMOR PIERCING AND BALL AMMO |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-83796/1 GOVERNMENT SPECIFICATION |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD CLASS | 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |