| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| RECESSED FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 10.588 INCHES MINIMUM WORKING AND |
| 11.010 INCHES MAXIMUM WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 175.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| FLANGE THICKNESS | 0.234 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.359 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| RECESSED 2ND END |
| RECESS DIAMETER | 1.854 INCHES NOMINAL 2ND END |
| RECESS DEPTH | 0.136 INCHES NOMINAL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.270 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.190 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.190 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.660 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.660 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 20.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 130.0 |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES, 00624, 81205, HAVE INDICATED THEIR PART NUMBERS CONTAINED ASBESTOS. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL |
| BOLT HOLE QUANTITY | 4 2ND END |
| SPECIAL FEATURES | HOSE IS CONNECTED IN CENTER WITH A 90 DEG ELBOW |