| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| RECESSED FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 63.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | BLACK |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| OZONE RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID STEEL WIRE AND |
| 4TH LAYER SPIRALLY LAID STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| FLANGE THICKNESS | 0.312 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| RECESSED W/GASKET GROOVE 2ND END |
| RECESS DIAMETER | 1.250 INCHES NOMINAL 2ND END |
| RECESS DEPTH | 0.188 INCHES NOMINAL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIFICATION/STANDARD DATA | SAE J517,100R9,TYPE A-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |