| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 43.400 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 190.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 450.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| BOLT CIRCLE DIAMETER | 2.562 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| CONNECTION STYLE | FLARE 1ST END |
| PLAIN SWIVEL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| FLANGE STYLE | ROUND W / BOLT HOLES 2ND END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| FLANGE OUTSIDE DIAMETER | 3.094 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |