| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE COPPER ALLOY ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT COPPER ALLOY FIRST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING SECOND END |
| BURST TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN OPTIONAL END FIRST END |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL PIPE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE FIRST END |
| HYDROSTATIC TEST PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC OR 1ST LAYER SPIRALLY WRAPPED FABRIC OR 1ST LAYER WOVEN FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OPERATING PRESSURE | 375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HEAT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 50.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| NOMINAL THREAD SIZE | 0.125 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.125 INCHES SECOND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| VACUUM IN TORR | 254.0 |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | NPTF FIRST END |
| THREAD SERIES DESIGNATOR | NPTF SECOND END |