| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED TEXTILE YARN AND 3RD LAYER MOLDED RUBBER, SYNTHETIC AND OUTER LAYER RUBBER IMPREGNATED FABRIC |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.980 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 66.750 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 3.250 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES SECOND END |
| NOMINAL THREAD SIZE | 1.062 INCHES FIRST END |
| SEAT ANGLE | 45.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| VACUUM IN TORR | 254.0 |
| SPECIFICATION/STANDARD DATA | SAE J1403,TYPE F-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | NPT SECOND END |
| THREAD SERIES DESIGNATOR | UNS FIRST END |
| THREAD QUANTITY PER INCH | 14 FIRST END |