| CONNECTION TYPE | RECESSED FLANGE 1ST END |
| RECESSED FLANGE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 14.200 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| OUTER LAYER RUBBER IMPREGNATED FABRIC |
| MINIMUM INSIDE BENDING RADIUS | 10.000 INCHES |
| FLANGE THICKNESS | 0.325 INCHES NOMINAL 1ST END |
| 0.325 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.440 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | RECESSED W/GASKET GROOVE 1ST END |
| RECESSED W/GASKET GROOVE 2ND END |
| RECESS DIAMETER | 0.815 INCHES NOMINAL 1ST END |
| 0.815 INCHES NOMINAL 2ND END |
| RECESS DEPTH | 0.195 INCHES NOMINAL 1ST END |
| 0.195 INCHES NOMINAL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL 1ST END |
| 1.750 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |