| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIFICATION/STANDARD DATA | SAE J30,30R2,TYPE 1 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 29.500 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 225.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 175.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| OZONE RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC OR |
| 1ST LAYER SPIRALLY WRAPPED FABRIC OR |
| 1ST LAYER WOVEN FABRIC AND |
| OUTER LAYER MOLDED RUBBER |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| SWIVEL, PLAIN 2ND END |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| 30.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 1ST END |
| NPTF 2ND END |
| NOMINAL THREAD SIZE | 0.125 INCHES 1ST END |
| 0.125 INCHES 2ND END |