| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEASURING METHOD AND LENGTH | 12.500 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| INSIDE DIAMETER | 0.485 INCHES MINIMUM |
| OUTSIDE DIAMETER | 0.875 INCHES MINIMUM AND |
| 0.935 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SPECIFICATION/STANDARD DATA | SAE AS604,SIZE 10-81343 NATIONAL STD/SPEC AND |
| 81343-AS617 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL CHAFE GUARD, POLYTETRAFLUOROETHYLENE TUBING , INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |