| END CONNECTION DESIGN | ELBOW FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 169.0 |
| BURST TEST PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLOW ANGLE | 74.5 DEGREES FIRST END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 9.210 INCHES NOMINAL EXCLUDING END FITTINGS |
| MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES FIRST END |
| NOMINAL THREAD SIZE | 1.312 INCHES SECOND END |
| SPECIAL FEATURES | 1ST END ELBOW TUBE HAS HOLE DRILLED AND MACHINED TO ACCOMODATE 1/4 IN. TUBE BOSS CONNECTION |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| VACUUM IN TORR | 406.4 |
| TEMP RATING | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 89372-HE271-5005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) SECOND END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD QUANTITY PER INCH | 12 SECOND END |